PSOne LCD Pinout
Moderator:Moderators
Here it is
The 12th pin on the first slot needs 5v so the screen will turn on. You'll need to solder a wire from the 12th pin to the 5v leg on the 7805 regulator.
If you arn't going to hook up a headphone jack you'll need to connect all of the headphone wires together.
You only can hook up composite video to the 2nd slot. It won't work if you connect it to the sync line. I haven't tested the sync out line but I'm pretty sure it's sync out.
The 12th pin on the first slot needs 5v so the screen will turn on. You'll need to solder a wire from the 12th pin to the 5v leg on the 7805 regulator.
If you arn't going to hook up a headphone jack you'll need to connect all of the headphone wires together.
You only can hook up composite video to the 2nd slot. It won't work if you connect it to the sync line. I haven't tested the sync out line but I'm pretty sure it's sync out.
The luma isn't composite. The screen uses the psone's luma as sync. If you tried composite on the 3rd connection of the 1st connector it wouldn't work but c sync works there. I got my composite off the 2nd slot 1 connection. It is used for like connecting a camcorder or anything else composite. Here is where I wired my composite, left and right audio.
yellow-video, red-right, white-left.
You can also connect the 3 other pads together unless your going to use a headphones jack wired correctly to it. the hp_r hp_s hp_L just short them together.
yellow-video, red-right, white-left.
You can also connect the 3 other pads together unless your going to use a headphones jack wired correctly to it. the hp_r hp_s hp_L just short them together.
Last edited by MR.MOD on Mon Sep 06, 2004 2:14 pm, edited 1 time in total.
This is how you would hook up a console with rgb to the screen.
You should check at www.gamesx.com first to see if you need to do anything to the console to get rgb.
If you arn't going to use rgb just hook it up like this.
Yellow-Composite Video
Red-Right Audio
White-Left Audio
Make sure you connect the consoles ground to the screen too.
You should check at www.gamesx.com first to see if you need to do anything to the console to get rgb.
If you arn't going to use rgb just hook it up like this.
Yellow-Composite Video
Red-Right Audio
White-Left Audio
Make sure you connect the consoles ground to the screen too.
- segasonicfan
- Moderator
- Posts:516
- Joined:Fri Jul 23, 2004 3:57 am
I would use the s video y as the sync cause that's what the screen normaly uses. Check http://www.gamesx.com/avpinouts/psxav.htmpjmk wrote:Thanks a lot. Also, on the playstation to get RGB video would you connect the video to the c sync (I THINK sync is in the ntsc pin).
for more info