Hi everyone,
I'm writing this in the hopes that someone can give me some help or advice. I bought this monitor off Amazon and all seemed to be in order...but when I hook it up to my battery(7.2 Volts/1850 mAh) the screen just flashes White and nothing else happens. I have tried more Voltage but still the same result with it flashing White. Not really sure whats wrong with it, because I know it is getting around 7.3 Volts consistent. Just is puzzling me. Hopefully someone can point me in the right direction.
Bolens
Link to Monitor: http://www.amazon.com/3-5-Inch-TFT-Moni ... roduct_top
3.5 Inch TFT LCD Problem
Moderator:Moderators
-
- Posts:257
- Joined:Sat Feb 05, 2011 8:18 pm
Re: 3.5 Inch TFT LCD Problem
Is it getting a video signal? I don't think they work without video.
ShockSlayer wrote:Proggy's right.
ttsgeb wrote:mfw prog was not only right, but 100% so.
Re: 3.5 Inch TFT LCD Problem
Same with me, have you found a fix?
- StealthShock
- Posts:19
- Joined:Wed Jul 11, 2012 9:21 pm
- PSN Username:StealthShock-
- 360 GamerTag:StealthShock
Re: 3.5 Inch TFT LCD Problem
Have you tried 12V? I think that's what it requires.
But I agree with Prog, I think you need to supply a video feed or whatever to make it work.
But I agree with Prog, I think you need to supply a video feed or whatever to make it work.
-
- Posts:24
- Joined:Fri Feb 17, 2012 2:08 pm
- PSN Username:superben52
3.5 Inch TFT LCD Problem
Yup feed it 12v and a video signal and see if it works. I just count the white flash on start up as a way of making sure it works.