I am currently working on a NESp project, using a PSone screen. I had about 90% of the wiring done (the controller was not fully wired) and had the screen powering up just fine, although a little dull. So I finalized the wiring and everything looked great. I moved my workspace a few feet over and accidentally unwired one connection to the 1/8" mono jack with 5 connections (only 4 of the connections are used in this project FYI). I accidentally re-wired to the other solder point of the mono jack when testing the portable out again and when the game loaded up, the screen flashed white. Now whenever I power up the console the screen will eventually brighten up until it becomes almost completely white. Is something wired incorrectly, or did I screw the screen up previously?
Hopefully someone who frequents this thread has some idea on what I should do to fix my PSone screen.
Screen FAQ / useful info
Moderator:Moderators
- themadhacker
- Senior Member
- Posts:2670
- Joined:Wed Aug 06, 2008 7:53 pm
- Location:ohio
Re: Screen FAQ / useful info
dude, make your own thread, don't hijack this one.
rest in peace, Ronnie James Dio! \m/
Re: Screen FAQ / useful info
I have asked the question twice in my own thread, thanks anyways.
Re: Screen FAQ / useful info
3.5" screen rewiev http://forums.benheck.com/viewtopic.php?f=8&t=35263
I TAKE COMMISSIONS FOR CNC-ROUTED CASES AND PORTABLES... JUST P.M. ME!
Re: Screen FAQ / useful info
Once upon a time I found ben's somewhat forgotten brightness hack, and had to find the PAL spot. I forgot to disclose this information at the time, but I am doing so now:
http://kyorune.com/modding/article.php?id=85" onclick="window.open(this.href);return false;
http://kyorune.com/modding/article.php?id=85" onclick="window.open(this.href);return false;