PS TWO mod chip?
Moderator:Moderators
- The Zydeco King
- Posts:185
- Joined:Mon Apr 05, 2004 8:12 am
I've been looking around and I can't find info on mod chips for the new PS Two. Do you guys know if there is one out already? I would like to run SNES, NES, MAME and Genesis emulators on it.
- segasonicfan
- Moderator
- Posts:516
- Joined:Fri Jul 23, 2004 3:57 am
There's actually 2 things that tell the system the tray is open. Inside the system one is to the back left of the lens (to the right of the phone modem port) and the other is next to the on/off button. One of these controls a buffer that stops the disc from spinning and the other tells the console the cd tray is closed. without the buffer removied a disc will not spin, that's why you need to tape down that switch as well.
-Segasonicfan
-Segasonicfan
- The Zydeco King
- Posts:185
- Joined:Mon Apr 05, 2004 8:12 am
Thanks for the help
But I'm going to hold back a while before installing a chip on my PSTwo. Check these links to find out why.
http://www.infinitymod.com/cgi-bin/matr ... e=laserv12
http://web02063.prolocation.net/phpBB2/ ... php?t=3371
From what I understand over 50% of chiped PSTwo's will quickly have a burnt out DVD lazer unless the new method of installing is done, even then the new method is so new it has not been fully tested.
But I'm going to hold back a while before installing a chip on my PSTwo. Check these links to find out why.
http://www.infinitymod.com/cgi-bin/matr ... e=laserv12
http://web02063.prolocation.net/phpBB2/ ... php?t=3371
From what I understand over 50% of chiped PSTwo's will quickly have a burnt out DVD lazer unless the new method of installing is done, even then the new method is so new it has not been fully tested.
Last edited by The Zydeco King on Wed Nov 17, 2004 7:01 pm, edited 2 times in total.