Ok, so for my first portable project I chose the gamecube, which maybe wasn't the best idea since I am a beginer, but I just had few questions.
1. How should I make a case?
2. How Do I power the whole thing? (I know batteries)
3. How do I power the screen? (wire to gamecube or batteries.....or what?)
P.S. I've been doing this since June so I've made a bit of progress.
Beginner Questions.
Moderator:Moderators
-
- Posts:1
- Joined:Tue Jun 14, 2011 9:13 pm
- 360 GamerTag:toastmanintheuk
-
- Posts:1000
- Joined:Sat Jan 30, 2010 12:22 am
- PSN Username:Haunted360
- 360 GamerTag:Haunted 360
- Location:Australia
- Contact:
Re: Beginner Questions.
1. Vacuum Form.
2. You need to build a circuit, or use the circuit that the batteries were designed for. Put research into the batteries. It is complex.
3. Yes. Basically wire to the protection circuit in parallel with the GameCube.
There are lots of topics on Modretro as I recall (@ShockSlayer)
2. You need to build a circuit, or use the circuit that the batteries were designed for. Put research into the batteries. It is complex.
3. Yes. Basically wire to the protection circuit in parallel with the GameCube.
There are lots of topics on Modretro as I recall (@ShockSlayer)