The Big SEGA Info Sticky!
Moderator:Moderators
Controller Data (3 Button Controller)
Pin 1 = Brown = Up
Pin 2 = Red = Down
Pin 3 = Orange = Ground/Left
Pin 4 = Yellow = Ground/Right
Pin 5 = Green = 5v
Pin 6 = Blue = Button A/Button B
Pin 7 = Gray = Select
Pin 8 = Black = Ground
Pin 9 = White = Start/Button C
9 pin D-SUB female connector at the controller
9 pin D-SUB male connector at the Genesis
Research by Skyone
Pin 1 = Brown = Up
Pin 2 = Red = Down
Pin 3 = Orange = Ground/Left
Pin 4 = Yellow = Ground/Right
Pin 5 = Green = 5v
Pin 6 = Blue = Button A/Button B
Pin 7 = Gray = Select
Pin 8 = Black = Ground
Pin 9 = White = Start/Button C
9 pin D-SUB female connector at the controller
9 pin D-SUB male connector at the Genesis
Research by Skyone
Last edited by Skyone on Thu Jun 14, 2007 4:53 pm, edited 1 time in total.
- DeathJr89
- Posts:89
- Joined:Sun Jun 18, 2006 11:31 am
- Location:new york, the land of bad accents
- Contact:
i just got a genesis (version 1) from a flea market. i have an RF chord to hook it up, a 9V power adapter (not the official one, but i plugged it in and the light went on, so i think im good) but no games or controls yet. i was thinking of making a controler for it, and i was wondering how i would use the information posted above to do that? and what would i need for that sort of thing? is that even possible?
This fall...
Death strikes twice...
wOOt
Death strikes twice...
wOOt
- Gump-in-space
- Posts:492
- Joined:Thu Jul 06, 2006 12:37 pm
- Location::noitacoL
I need to make my own AV cord for the genesis 3 I picked up. I don't really want to buy one because it would cost like $12 total thru e(vil)Bay and I wouldn't even be able to use it on my regular Genesis 1. I plan on hacking up the Genesis 3 anyways, but I'd like to know for sure that it works before I start doing so.
u could mod it to have regular av outs and then just use a regular a/v cord
www.myspace.com/undersurveillance
(my ill band)
(my ill band)
-
- Senior Member
- Posts:2151
- Joined:Wed Dec 13, 2006 2:43 pm
- PSN Username:Geekystig790
- 360 GamerTag:Mesu Gitsune
- Location:Fairborn, Ohio
EDIT: Decided to remove my Genesis Region Switch Instructions, for lack of details, really bad instructions overall, and no images. Just Google to figure out how to fit a region switch.
Last edited by Jongamer on Tue Sep 06, 2011 9:03 pm, edited 1 time in total.
-
- Senior Member
- Posts:2151
- Joined:Wed Dec 13, 2006 2:43 pm
- PSN Username:Geekystig790
- 360 GamerTag:Mesu Gitsune
- Location:Fairborn, Ohio
Could you do one for Genesis 1 with Solder blobs?Droke wrote:Got bored so I made this. It is for something specific I'm doing, but I figured someone might have a use. (I used the info from the one at the start of the thread, but added the solder blobs.)
(Genesis 2 and 3, if you couldent tell.)
Last edited by Jongamer on Tue Sep 06, 2011 9:06 pm, edited 1 time in total.
- A_Username
- Posts:335
- Joined:Mon Mar 13, 2006 5:00 pm
- Location:Sioux Falls, SD
- Contact:
-
- Senior Member
- Posts:2151
- Joined:Wed Dec 13, 2006 2:43 pm
- PSN Username:Geekystig790
- 360 GamerTag:Mesu Gitsune
- Location:Fairborn, Ohio
Re: The Big SEGA Info Sticky!
Time to update that Link, its gives a 404 error at Bens main page.bicostp wrote:OK, the Sega forum is lacking a reference sticky, so I'd better get off my lazy butt and make one!
THIS STICKY IS ALWAYS UNDER CONSTRUCTION!
Feel free to add your own info! -The Management
Please be patient as I slowly piece the Sega info together. )
Places to get Cartridge connectors:
-Old consoles
-Digikey
-Game Genies
-Sonic & Knuckles cartridges
Most 64-pin card-edge connectors with a .1 pitch will work.
<b><a href="http://benheck.com/Downloads/RadicaCart ... jpg">Click here for the Radica-cart slot pinout chart</b></a>
The chart may look confusing, but don't worry, it's not too hard. Just match the pin on the ROM chip to the pin on the cart slot with the same name (A10 to A10, b52 to b52, GND to GND...)
AV pinouts:
<img src="http://www.gamesx.com/grafx/32xpin.jpg"><img src="http://www.gamesx.com/grafx/gen1.jpg">
Note! The numbering sequence on this diagram is NOT the proper numbering, and won't match the numbers on your connector.
Important thread directory
<a href="http://benheck.com/phpBB/viewtopic.php?t=2764">Cart Slots</a>
-
- Senior Member
- Posts:2151
- Joined:Wed Dec 13, 2006 2:43 pm
- PSN Username:Geekystig790
- 360 GamerTag:Mesu Gitsune
- Location:Fairborn, Ohio
heres some Genesis Mods.
http://www-unix.ecs.umass.edu/~dhowland/mod/
EDIT: Link is now broken. Oh well....
http://www-unix.ecs.umass.edu/~dhowland/mod/
EDIT: Link is now broken. Oh well....
Last edited by Jongamer on Tue Sep 06, 2011 9:07 pm, edited 1 time in total.
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
Just thought we should have a link to the list of "finished" portables that c_mon was kind enough to put together.
List of finished portables
List of finished portables
dragonhead wrote:sweet. ive spent a third of my life on benheck!
Thanks for your interest. Enjoy...joedog86 wrote:Just thought we should have a link to the list of "finished" portables that c_mon was kind enough to put together.
List of finished portables
I just wanted to say I found this page: http://devster.monkeeh.com/sega/radica/