Snesp (almost finished)
Moderator:Moderators
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
I have made a test of snes board,i have soldered the plug for tv out on the snes board and when i start the system, image is blurs and i have a black screen without sound (tested with a lot of cartridge), next test is for cartridge slot,snes work (i think) just to find where is the problem.
Question, the pinout of pal cable is the same than the ntsc cable? snes mini bought without cable on ebay and i only have the cable of my pal snes to test . I saw that only the pin 3 not be the same on snes pal and ntsc, problem is not coming from cable arf.....
Question, the pinout of pal cable is the same than the ntsc cable? snes mini bought without cable on ebay and i only have the cable of my pal snes to test . I saw that only the pin 3 not be the same on snes pal and ntsc, problem is not coming from cable arf.....
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
Well..... snes doesn't work and i have try all i can do but snes board is dead, i have bought a new one on ebay today for 82 usd or 59 euro shipping cost included, sh*t it is not offered.
Hi, i found a website who made a personalised skin, i have done the skin with my 3d model and i have asked if it is possible to do this, i wait for the answer.If you want to see, what it is possible to do follow the link below.
http://www.skinmania.com/default.aspx?p ... lang=en-GB
Maybe i will put a picture on the background of the face plate.
Bye!
Hi, i found a website who made a personalised skin, i have done the skin with my 3d model and i have asked if it is possible to do this, i wait for the answer.If you want to see, what it is possible to do follow the link below.
http://www.skinmania.com/default.aspx?p ... lang=en-GB
Maybe i will put a picture on the background of the face plate.
Bye!
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
assez impressionnant!
i really do like the case, extremely professional looking. i like how you used brass stand-offs to mount things, im going to use those in my next portable. i also like the switches you used for the buttons. i have some experience with those and i think they are quite good.
(if there is something you do not understand, just ask.)
i really do like the case, extremely professional looking. i like how you used brass stand-offs to mount things, im going to use those in my next portable. i also like the switches you used for the buttons. i have some experience with those and i think they are quite good.
(if there is something you do not understand, just ask.)
This is probably one of, if not THE, most professional looking portables on this site. If I didn't know better, I'd almost think it was made on a production line. GREAT JOB!
[url=http://thekevbot.com]Portfolio[/url]
[url=http://twitter.com/thekevbot]Twitter[/url]
[url=http://blog.thekevbot.com]Blog[/url]
[url=http://twitter.com/thekevbot]Twitter[/url]
[url=http://blog.thekevbot.com]Blog[/url]
- Twilight Wolf
- Posts:848
- Joined:Wed Jan 14, 2009 10:46 pm
- PSN Username:MySegaSaturn
- Location:Reno
- Contact:
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
I think it is good for buttons but i do not like for directionnal cross, it is not a good sensation, perhaps a little too hard to the touch even it is soft tact switch.i also like the switches you used for the buttons. i have some experience with those and i think they are quite good
Thanks ^^ but i saw a lot of good job on other portable like brian gardiner on his portable psone and ps2 for exemple.This is probably one of, if not THE, most professional looking portables on this site. If I didn't know better, I'd almost think it was made on a production line. GREAT JOB!
My portable looks good because it is build with fused deposition modelling, that why it is "professional looking" even i was not really happy with the result because it is not suitable for this kind of thing, too soft and too reactive to heat.Even if it is more expensive but quite fragile, the stereolithography gives a better result than the FDM and I rather regret not having used the stereolithography, which would have avoided the job I did on the box.[/quote]
Pics of the box when i receive it:
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
- ChrisKoopa
- Posts:102
- Joined:Thu Jul 31, 2008 10:06 am
- Contact:
- Triton
- Moderator
- Posts:7397
- Joined:Mon May 24, 2004 12:33 pm
- 360 GamerTag:triton199
- Steam ID:triton199
- Location:Iowa
- Contact:
Fantastic job! looks like im gonna have to step up my game to keep pace with all these new guys crankin out amazing portables!
Visit us at Portablesofdoom.org