GBA Modding
Moderator:Moderators
I recently acquired a white GBA from a friend and thought to myself this is boring. What could I do to spiff it up but then I realize my knowledge with this kind of stuff is very thin. My plan is to take it apart (Darn tri-wing), clean it, paint it and maybe add some LEDs. Any tips/ guides? Also the battery cover is broken. The little tab that puts pressure on it to keep in place has snapped off thanks to its previous owner. Any creative fixes on that?
- iphone_addict
- Posts:46
- Joined:Wed Feb 01, 2012 4:25 pm
Re: GBA Modding
I led moded my gba. looke at photo for help. No resistor needed! led lights up when batterys are put in.
-
- Posts:257
- Joined:Sat Feb 05, 2011 8:18 pm
Re: GBA Modding
You should probably put a resister to prevent the LED's from burning out.
ShockSlayer wrote:Proggy's right.
ttsgeb wrote:mfw prog was not only right, but 100% so.
- iphone_addict
- Posts:46
- Joined:Wed Feb 01, 2012 4:25 pm
Re: GBA Modding
probably a good idea, but so far i haven't had a problem with it.