Hi all, apologies in advance for my arcade machine n00b status...
I have recently come into possession of a Tekken arcade machine, i think it used to be a golf game (judging by the stickers around the joystick) but its now a Tekken machine (marquee says Tekken, as do the screen-side instructions), so i assume someone has either changed the PCB or for some reason just stuck a golf game decal on it (!).
The problem i have is that the game was working fine and then suddenly died. I have changed the main fuse in the plug and now the machine starts up, lights come on, all the kung-fu game noises start playing from the speakers, but the screen stays blank. Do you think this could be a fuse in the monitors plug or something more serious?
Any suggestions would be greatly appreciated.
Thanks
Arcade machine screen help
Moderator:Moderators
Re: Arcade machine screen help
hiya hitch , i would recommend going to Arcade Otaku Forums for more advice on this matter. The problem sounds very much like something is wrong with you Monitors Chassis , i had a problem with my Chassis and sent it to Jomac Amusements in Australia and now im back up and running.
hope this helps and good luck
s8n
hope this helps and good luck
s8n
-
- Posts:1000
- Joined:Sat Jan 30, 2010 12:22 am
- PSN Username:Haunted360
- 360 GamerTag:Haunted 360
- Location:Australia
- Contact:
Re: Arcade machine screen help
Hey,
Yea a fuse on the Monitor Chassis would be it.
It could also be a diode as they blow sometimes too.
Test them with a Multimeter (But of course, unplug it)
Also, check your PSU, JAMMA Harness and connections too.
Thanks.
Yea a fuse on the Monitor Chassis would be it.
It could also be a diode as they blow sometimes too.
Test them with a Multimeter (But of course, unplug it)
Also, check your PSU, JAMMA Harness and connections too.
Thanks.
-
- Posts:1000
- Joined:Sat Jan 30, 2010 12:22 am
- PSN Username:Haunted360
- 360 GamerTag:Haunted 360
- Location:Australia
- Contact:
Re: Arcade machine screen help
*EDIT*
You may need to re-cap the Monitor too...
Buy a Cap-Kit for it and re-install a fresh one
You may need to re-cap the Monitor too...
Buy a Cap-Kit for it and re-install a fresh one