Making an edge.

Yes it is nice to be able to put your projects INSIDE something isn't it? You know, to hold everything together so it doesn't flop around? Discuss the techniques here!

Moderator:Moderators

Post Reply
User avatar
Kurt_
Portablizer
Posts:5748
Joined:Thu Nov 24, 2005 10:32 am
Steam ID:kurbert
Location:Ontario, Canada
Contact:
Contact Kurt_
Making an edge.

Post by Kurt_ » Thu Sep 14, 2006 7:57 am

Any ideas on how to make an NEAT edge that's similar all the way around the case on both halves?
Hey, sup?
Top
User avatar
joevennix
Portablizer
Posts:999
Joined:Sat Jan 14, 2006 9:34 am
Location:On permanent vacation from reality.
Contact:
Contact joevennix

Post by joevennix » Thu Sep 14, 2006 3:45 pm

If you have access to a router, that is the easiest way. Cut the shape out of wood, put a template bit in the router, put the two plastic sheets underneath the wood, and move it around the bit. The top part has a roller that the wooden shape slides along, and the bottom part is a blade that cuts the plastic.
Image
Top
Post Reply

Return to “Case Construction”