Snesp (almost finished)

darthchris13 · Post by **darthchris13** » Wed Dec 31, 2008 2:26 pm

I have made a test of snes board,i have soldered the plug for tv out on the snes board and when i start the system, image is blurs and i have a black screen without sound (tested with a lot of cartridge), next test is for cartridge slot,snes work (i think) just to find where is the problem.

Question, the pinout of pal cable is the same than the ntsc cable? snes mini bought without cable on ebay and i only have the cable of my pal snes to test . I saw that only the pin 3 not be the same on snes pal and ntsc, problem is not coming from cable arf.....

darthchris13 · Post by **darthchris13** » Thu Jan 01, 2009 3:15 pm

Well..... snes doesn't work and i have try all i can do but snes board is dead, i have bought a new one on ebay today for 82 usd or 59 euro shipping cost included, sh*t it is not offered.

Hi, i found a website who made a personalised skin, i have done the skin with my 3d model and i have asked if it is possible to do this, i wait for the answer.If you want to see, what it is possible to do follow the link below.

http://www.skinmania.com/default.aspx?p ... lang=en-GB

Maybe i will put a picture on the background of the face plate.

Bye!

darthchris13 · Post by **darthchris13** » Thu Jan 15, 2009 10:55 am

I have received my new snes today and i have tried to plug all the elements,
it works well, i have to do all things wich are missing like slot card for exemple.

dragonhead · Post by **dragonhead** » Thu Jan 15, 2009 11:34 am

assez impressionnant!

i really do like the case, extremely professional looking. i like how you used brass stand-offs to mount things, im going to use those in my next portable. i also like the switches you used for the buttons. i have some experience with those and i think they are quite good.

(if there is something you do not understand, just ask.)

khaag · Post by **khaag** » Thu Jan 15, 2009 8:53 pm

This is probably one of, if not THE, most professional looking portables on this site. If I didn't know better, I'd almost think it was made on a production line. GREAT JOB!

Twilight Wolf · Post by **Twilight Wolf** » Fri Jan 16, 2009 1:21 am

This is turning out to be a beautiful portable! Like khaag said, it looks very professional, and I very much look forward to seeing it completed!

Keep up the good work, and good luck!

darthchris13 · Post by **darthchris13** » Sat Jan 17, 2009 4:07 pm

i also like the switches you used for the buttons. i have some experience with those and i think they are quite good

I think it is good for buttons but i do not like for directionnal cross, it is not a good sensation, perhaps a little too hard to the touch even it is soft tact switch.

This is probably one of, if not THE, most professional looking portables on this site. If I didn't know better, I'd almost think it was made on a production line. GREAT JOB!

Thanks ^^ but i saw a lot of good job on other portable like brian gardiner on his portable psone and ps2 for exemple.
My portable looks good because it is build with fused deposition modelling, that why it is "professional looking" even i was not really happy with the result because it is not suitable for this kind of thing, too soft and too reactive to heat.Even if it is more expensive but quite fragile, the stereolithography gives a better result than the FDM and I rather regret not having used the stereolithography, which would have avoided the job I did on the box.[/quote]
Pics of the box when i receive it:

darthchris13 · Post by **darthchris13** » Sun Jan 18, 2009 8:56 am

Well, i have mounted screen and mother board and all works well, buttons , the directionnal cross and speakers works too.

Kyo · Post by **Kyo** » Sun Jan 18, 2009 9:03 am

nice! that looks great

qerkdtx · Post by **qerkdtx** » Sun Jan 18, 2009 9:11 am

Awesome man, looks fantastic. Keep it up.

darthchris13 · Post by **darthchris13** » Sun Jan 18, 2009 9:17 am

Thank you guys

Website · Post by **Life of Brian** » Sun Jan 18, 2009 9:41 am

It is so beautiful that I have tears of joy streaming down my fanboy face

darthchris13 · Post by **darthchris13** » Sun Jan 18, 2009 12:39 pm

PostPosted: Sun Jan 18, 2009 3:41 pm Post subject:
It is so beautiful that I have tears of joy streaming down my fanboy face

Same thing for me

It is closed, for now power supply will be external, i study for internal supply soon

Thanks for all encouragement and help.

ChrisKoopa · Post by **ChrisKoopa** » Sun Jan 18, 2009 1:06 pm

congratulations on the great looking portable

Post by **Triton** » Sun Jan 18, 2009 1:30 pm

Fantastic job! looks like im gonna have to step up my game to keep pace with all these new guys crankin out amazing portables!