Search found 235 matches
- Sun Jan 06, 2013 9:26 am
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: Xbox HDMI Green Problem
- Replies: 0
- Views: 14558
Xbox HDMI Green Problem
Hi, I managed to get hold of a xbox 360 jasper v1. HDMI worked fine for about 10 minutes. I turned it off then back on and now it has a huge green tint to it. It is almost like the black channel has been removed as when I display a complete black image the screen is solid green. The AV connection wo...
- Thu Jan 03, 2013 7:32 pm
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: Xbox 360 SLIM Aluminium Unibody Laptop
- Replies: 3
- Views: 14309
Re: Xbox 360 SLIM Aluminium Unibody Laptop
I would consider using a copper base and heat pipes that screw into the aluminum just to make sure the heat spreads out quick enough. Just being solid aluminum may not do enough to spread the heat from that one area. Also, It couldn't hurt to still have shallow fins on the topside of the case Any l...
- Thu Jan 03, 2013 12:39 pm
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: Xbox 360 SLIM Aluminium Unibody Laptop
- Replies: 3
- Views: 14309
Xbox 360 SLIM Aluminium Unibody Laptop
Now before you leave, thinking this is just another "how do i get started doing an xbox laptop" its not: I have already made an xbox laptop, annoyingly just before the slim consoles came out. Its large, heavy and fragile and isnt the best to take anywhere on a trip. So I thought I may make another 3...
- Thu Jan 03, 2013 11:47 am
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: Xbox 360 Power & MOSFET Types
- Replies: 6
- Views: 18423
Re: Xbox 360 Power & MOSFET Types
If it's missing the standby Regs and you're trying to power it up, then you should honestly just bin that thing now. Troubleshooting a PCB like that with nothing to go by isn't going to end up with great results. Even with the schematic, DMM, Oscilloscope and a working one for comparison it's still...
- Wed Jan 02, 2013 5:56 pm
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: Xbox 360 Power & MOSFET Types
- Replies: 6
- Views: 18423
Re: Xbox 360 Power & MOSFET Types
0022 isn't overheating, it's some hardware error, (H)ANA, GPU or Southbridge. The FETs are surface mount, so there's no difference between the driver IC and how they're mounted. If you're getting 1.8v where there should be 5v then something is loading it down, though that's an awful odd voltage to ...
- Tue Jan 01, 2013 11:23 am
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: Xbox 360 Power & MOSFET Types
- Replies: 6
- Views: 18423
Re: Xbox 360 Power & MOSFET Types
If all of the FETs are bad then there's more of an issue there than just them. A lot of them are in parallel with others also, so if only 1 is bad it will look like more are. Also, testing them in circuit is no way to tell if they're bad or not as you'll always get an incorrect measurement from oth...
- Sat Dec 29, 2012 2:48 pm
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: Xbox 360 Power & MOSFET Types
- Replies: 6
- Views: 18423
Xbox 360 Power & MOSFET Types
Hi, I have a spare jasper board. Board works fine, although it gives an immediate 0001 power problem. The MOSFET's have gone, and all need replacing. I have a spare falcon, opus and xenon board but no spare jasper (as jaspers dont tend to break). I was thinking of getting all the mosfets of the falc...
- Fri Dec 30, 2011 11:27 am
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: xbox 360 laptop
- Replies: 3
- Views: 5788
Re: xbox 360 laptop
I found this is the simplest way to do it and it is how I did it: Get a universal inverter for you screen (not that expensive from ebay) Connect the inverter to the screen, and get the 12v power cables from it find a pinout for the xbox 360 motherboard power connector plug , and find the 12v and GND...
- Fri Dec 30, 2011 11:21 am
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: 3PS60 Controller, Wired 360 controller in PS3 shell
- Replies: 151
- Views: 320377
Re: 3PS60 Controller, Wired 360 controller in PS3 shell
Awesome - PS3 controllers are so much better than 360 ones, especially the joysticks!
Good work!
Good work!
- Fri Dec 30, 2011 11:13 am
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: PSN Usernames
- Replies: 59
- Views: 82627
Re: PSN Usernames
Mine is: SEB-3-
I usually play MW2 but also other games.
I usually play MW2 but also other games.
- Thu Dec 29, 2011 4:52 pm
- Forum: Technical Questions and Answers
- Topic: Acer Aspire One USB Ports!?
- Replies: 0
- Views: 3420
Acer Aspire One USB Ports!?
Today I opened up my acer aspire one A150 netbook (I have opened it many times before without problem). I was soldering wires onto pins 36 and 38 of the mini pci-e wifi connector. When I tested them, it recognized the flash drive I plugged into the ports when I turned it on. I then put tape over the...
- Mon Dec 12, 2011 2:53 pm
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: PS3 Heatsink- Slim it down?
- Replies: 4
- Views: 6273
Re: PS3 Heatsink- Slim it down?
Although I havent started my PS3 laptop yet, I have built an xbox 360 one. I used the stock heatinks and trimmed them down and the cpu got wayy to hot and I had to put 3 extra fans on it to keep it cool which also increased the sound. If I were you I would spen a little time researching some laptop ...
- Sun Aug 28, 2011 12:39 pm
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: Xbox Laptop cooling arrangement explanation.
- Replies: 0
- Views: 2800
Xbox Laptop cooling arrangement explanation.
Hi, I will explain how I did my cooling system for my xbox laptop. Any recomendations to make it better or how you have done it are welcome. Ok The cooling system is very simply, but effective. It uses both pushing and pulling fans, whith airflow going out of the front and back of the laptop. This i...
- Thu Aug 25, 2011 12:57 am
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: PS3 to VGA - The easiest way to connect a monitor to a PS3
- Replies: 3
- Views: 4805
Re: PS3 to VGA - The easiest way to connect a monitor to a PS3
I just contacted the seller and this is what they said back to me: Unfortunately, we can't give specific compatibility advice - the only way to find out really is to try the cable. It does not have a transcoder built in, though, as this cable simply outputs the normal console output through a VGA po...
- Tue Aug 23, 2011 12:06 pm
- Forum: Xbox 360, PlayStation 3, Wii
- Topic: PS3 to VGA - The easiest way to connect a monitor to a PS3
- Replies: 3
- Views: 4805
PS3 to VGA - The easiest way to connect a monitor to a PS3
Hi, I am going to get a ps3, and I have a 23" 1080p monitor with a DVI-D cable but its not hdcp compliant. I am stuck to convert the signal to VGA. There are 2 ways I have found of doing this: 1: Get a HDMI to VGA transcoder box which is quite expensive. I reckon this is definitely going to work, an...